Our products are long lasting and easy to clean through their intelligent design.
Pharmaceutical manufacturing
Hygienic stainless steel furniture specified for GMP-compliant pharmaceutical manufacturing
Good manufacturing practice compliant, validated cleaning compatible, UK manufactured. From dispensary benches to complete pharmaceutical production area fit-out.
The challenge
Pharmaceutical manufacturing demands surfaces that can be validated, cleaned to protocol, and documented for regulatory inspection
Good manufacturing practice requirements, MHRA inspections, and validated cleaning procedures mean standard furniture is not acceptable. Every surface must support your contamination control strategy, survive repeat chemical cleaning without degradation, and be fully documented for your quality management system.
GMP compliantMHRA inspection ready304L and 316L grade stainless steelValidated cleaning compatible
Equipment your auditor expects to see
Every piece of Teknomek stainless steel furniture is designed and manufactured to meet the standards that govern your environment. Not as an afterthought - as a baseline.
GMP compliant
Designed to support contamination control strategies and withstand the scrutiny of good manufacturing practice regulatory inspection. Surface finishes, weld standards, and construction methods are specified to GMP requirements as a baseline, not an option.
MHRA inspection read
Specification-matched to the surface and equipment standards expected during Medicines and Healthcare products Regulatory Agency facility audits. We supply documentation to support your supplier qualification process on request.
316L grade stainless steel
316 low-carbon grade is specified as standard for pharmaceutical environments where chemical resistance to cleaning agents and disinfectants is critical. We can also electropolish our steel, and specify the correct alloy for your application before you order.
Validated cleaning compatible
Every weld is specified to the product's environment, full-radius where hygiene flow demands it, precision-finished elsewhere, with non-porous surfaces throughout that withstand chemical disinfection without pitting or degradation.
Our most-specified pharmaceutical manufacturing equipment
Every product below is manufactured to GMP-compatible standards. Click to view full specifications, dimensions and pricing, or request a specification sheet.
Stainless steel solid modular shelving unit
Multiple Blocks Available
Laboratory under-bench double-door and drawer cupboard 1000mm wide
Open frame pedestal waste bag holders
Why Teknomek
What makes us the right supplier for pharmaceutical manufacturing
We have supplied hygienic stainless steel furniture to pharmaceutical manufacturing facilities since 1987. That means we understand GMP documentation requirements, validated cleaning regimes, and MHRA audit expectations from direct operational experience, not from a product catalogue.
UK manufactured since 1987
We manufacture in our own Norfolk facility, giving us full control over quality, lead times, and product consistency. When you need a replacement part, a second phase of furniture, or a bespoke item to match an existing installation, we still have the specification on file and the capability to deliver it.
Specification support available
Not sure whether your environment requires 304L or 316L? Not certain which configuration supports your hygiene flow? Our team works through the specification with you before you commit to an order — so what arrives on site is right first time, without the cost and delay of returns or replacements.
ISO 9001 quality management
Our manufacturing process is independently audited and certified to ISO 9001. That means documented quality procedures, consistent product standards, and a paper trail you can reference in your own supplier audit documentation, relevant if you supply into BRCGS-audited retail chains.
One supplier, complete solution
From preparation tables and wash stations to changing room lockers, hygiene stations, and waste handling equipment, Teknomek supplies everything your food production facility needs from a single source. One purchase order, one delivery schedule, one point of contact, and a consistent specification throughout the building.
Supplying GMP-regulated facilities since 1987
We have supplied furniture to pharmaceutical manufacturers operating under GMP, MHRA, and FDA-equivalent regimes for nearly four decades. We understand the documentation requirements, validation expectations, and contamination control demands of pharmaceutical production environments.
Bespoke sizing available
Food production facilities rarely have standard room dimensions. Where our standard range does not fit your space, we manufacture furniture to your exact dimensions and workflow requirements, at the same quality standard, from the same facility, with the same lead time commitment as our stock range.
Common questions about Teknomek and pharmaceutical manufacturing equipment
Everything you need to know before specifying stainless steel furniture for your GMP facility.
What stainless steel grade is required for pharmaceutical manufacturing furniture?
316L low-carbon grade is the standard specification for pharmaceutical manufacturing environments. It offers significantly higher resistance to chloride corrosion and chemical disinfectants than 304L, making it suitable for the validated cleaning regimes and chemical exposure typical in GMP facilities. Teknomek specifies the correct grade for your application and cleaning protocol before you order.
Does Teknomek furniture meet GMP requirements for pharmaceutical manufacturing?
Yes. Teknomek stainless steel furniture is designed and manufactured to support good manufacturing practice requirements. Surface finishes, weld standards, and construction methods are specified to eliminate harborage points and withstand the validated cleaning regimes required in pharmaceutical production environments. We can supply documentation to support your supplier qualification process.
Can Teknomek provide documentation for pharmaceutical supplier qualification?
Yes. We can provide material certificates, weld specifications, and product documentation to support your supplier qualification and quality management system requirements. Contact our team at the point of enquiry and we will confirm what documentation is available for the specific products you are specifying.
What is the difference between 304L and 316L stainless steel for pharmaceutical environments?
304L is the standard food-grade alloy and is suitable for less aggressive environments. 316L contains molybdenum, which significantly increases resistance to chloride corrosion and chemical attack, essential where validated cleaning agents, strong disinfectants, or high-frequency cleaning cycles are used. For pharmaceutical manufacturing, 316L is the correct specification in the majority of cases. Our team will confirm the right grade for your specific application.
Does Teknomek manufacture bespoke furniture for pharmaceutical facilities?
Yes. Where standard sizes do not fit your cleanroom, dispensary, or production area layout, Teknomek manufactures furniture to your exact room dimensions and workflow requirements. Bespoke items are produced in our Norfolk facility to the same GMP-compatible quality standards as our standard range, with the same grade options and finish specifications.
Is Teknomek furniture UK manufactured
Yes. Teknomek has manufactured stainless steel furniture in our own Norfolk facility since 1987. UK manufacture gives us full control over quality, lead times, and product consistency, and means shorter supply chains, faster response to bespoke requirements, and documented traceability for customers who need to evidence procurement for audit purposes.
What lead times should I expect for Teknomek stainless steel furniture?
Standard range items are typically available on short lead times from stock or near-stock. Bespoke and made-to-measure furniture lead times vary depending on specification and volume, our team will confirm lead time at the point of quotation. For project fit-outs, we recommend contacting us as early in the procurement process as possible so we can schedule production to meet your site programme.
Ready to specify your pharmaceutical manufacturing facility?
Browse our full pharmaceutical equipment range and order online, or speak to our team about a project quote, whether it is a single dispensary bench or a complete GMP production area fit-out.
