Our products are long lasting and easy to clean through their intelligent design.
Changing rooms and washrooms
Hygienic stainless steel changing room and washroom furniture built for regulated facilities
Hygiene flow compliant, wash-down rated, UK manufactured. From individual lockers and benches to complete changing room and washroom fit-out for food, pharmaceutical, and cleanroom facilities.
The challenge
Changing rooms and washrooms are the first line of hygiene control, and the first place auditors look
Hazard analysis and critical control points hygiene flow requirements, British Retail Consortium Global Standard audit expectations, and sector-specific gowning protocols mean your changing facilities must be designed to prevent contamination transfer, not just provide storage. The wrong furniture in a changing room puts your entire hygiene system at risk before a single person enters the production area.
HACCP hygiene flow compliantBRCGS audit ready304L grade stainless steelGowning protocol compatible
Equipment your auditor expects to see
Every piece of Teknomek stainless steel furniture is designed and manufactured to meet the standards that govern your environment. Not as an afterthought - as a baseline.
HACCP hygiene flow
Furniture layouts and locker configurations designed to enforce one-way hygiene flow and prevent contamination transfer from street to production environments. The physical arrangement of the changing room is a critical control point, we treat it as one.
BRCGS audit ready
Specification-matched to British Retail Consortium Global Standard requirements for personnel hygiene facilities in food manufacturing and storage environments. Whether you are preparing for your first audit or maintaining a high rating, our furniture is specified to the standard.
Wash-down compatible
Welded and finished for the wet conditions, chemical exposure, and high-pressure cleaning regimes of washroom and changing environments. Every surface is specified to resist degradation over time, so the furniture that arrives on site still passes audit five years later.
Gowning compatible
Bench heights, locker configurations, and accessory positions designed to support gowning protocols in food, pharmaceutical, and cleanroom facilities. The changing room layout should make compliance easier, not harder.
Our most-specified changing room and washroom equipment
Every product below is specified for regulated hygiene facilities. Click to view full specifications, dimensions and pricing, or request a specification sheet.
Freestanding five station PPE dispenser
Stainless steel one station scrub sink
Why Teknomek
What makes us the right supplier for changing rooms and washrooms
We have supplied hygienic stainless steel changing room and washroom furniture to food production, pharmaceutical, and cleanroom facilities since 1987. That means we understand HACCP hygiene flow requirements, gowning protocols, and the audit expectations for personnel hygiene facilities across multiple regulated sectors.
UK manufactured since 1987
We manufacture in our own Norfolk facility, giving us full control over quality, lead times, and product consistency. When you need a replacement part, a second phase of furniture, or a bespoke item to match an existing installation, we still have the specification on file and the capability to deliver it.
Specification support available
Not sure whether your environment requires 304L or 316L? Not certain which configuration supports your hygiene flow? Our team works through the specification with you before you commit to an order — so what arrives on site is right first time, without the cost and delay of returns or replacements.
ISO 9001 quality management
Our manufacturing process is independently audited and certified to ISO 9001. That means documented quality procedures, consistent product standards, and a paper trail you can reference in your own supplier audit documentation, relevant if you supply into BRCGS-audited retail chains.
One supplier, complete solution
From preparation tables and wash stations to changing room lockers, hygiene stations, and waste handling equipment, Teknomek supplies everything your food production facility needs from a single source. One purchase order, one delivery schedule, one point of contact, and a consistent specification throughout the building.
Supplying regulated changing facilities since 1987
We have supplied changing room and washroom furniture to facilities operating under HACCP, BRCGS, GMP, and ISO 14644 requirements for nearly four decades. We understand hygiene flow design, gowning protocol requirements, and the audit expectations for personnel hygiene facilities across food, pharmaceutical, and cleanroom sectors.
Bespoke sizing available
Food production facilities rarely have standard room dimensions. Where our standard range does not fit your space, we manufacture furniture to your exact dimensions and workflow requirements, at the same quality standard, from the same facility, with the same lead time commitment as our stock range.
Common questions about Teknomek and changing room and washroom equipment
Everything you need to know before specifying stainless steel furniture for your personnel hygiene facilities.
What changing room furniture is required for a HACCP-compliant food production facility?
HACCP-compliant food production facilities require changing room furniture that supports one-way hygiene flow, prevents contamination transfer from street clothing to production areas, and is cleanable to the same standards as the production environment itself. This means stainless steel lockers with sloped tops, wash-down rated bench seating, sealed surfaces with no harborage points, and a layout that physically enforces the hygiene flow route.
Does Teknomek changing room furniture meet BRCGS audit requirements?
Yes. Teknomek stainless steel changing room and washroom furniture is specification-matched to British Retail Consortium Global Standard requirements for personnel hygiene facilities in food manufacturing and storage environments. Our furniture is designed to support BRCGS hygiene flow requirements and withstand the cleaning regimes required by audited facilities.
What is hygiene flow and how does changing room furniture support it?
Hygiene flow is the principle that personnel move through a defined one-way route from street environment to production area, with each stage of the route progressively increasing hygiene control. Changing room furniture supports hygiene flow by physically directing movement, locker placement, bench positioning, wash station location, and door arrangement all contribute to enforcing the correct sequence and preventing backflow contamination.
Can Teknomek furniture be used in changing rooms for pharmaceutical and cleanroom facilities?
Yes. Teknomek supplies changing room and gowning area furniture to pharmaceutical manufacturing and ISO-classified cleanroom facilities as well as food production environments. The specification requirements differ by sector, pharmaceutical and cleanroom gowning areas typically require 316L grade and more stringent surface finish standards. Our team will advise on the correct specification for your sector and classification level.
Can Teknomek manufacture bespoke changing room furniture to non-standard dimensions?
Yes. Changing room and anteroom spaces are rarely standard dimensions. Where our standard range does not fit your layout or gowning protocol requirements, Teknomek manufactures furniture to your exact room dimensions and workflow requirements. Bespoke items are produced in our Norfolk facility to the same quality standards as our standard range.
Is Teknomek furniture UK manufactured?
Yes. Teknomek has manufactured stainless steel furniture in our own Norfolk facility since 1987. UK manufacture gives us full control over quality, lead times, and product consistency, and means shorter supply chains and documented traceability for customers who need to evidence procurement for audit purposes.
What lead times should I expect for Teknomek changing room furniture?
Standard range items are typically available on short lead times from stock or near-stock. Bespoke and made-to-measure items vary depending on specification and volume, our team will confirm lead time at the point of quotation. For complete changing room and washroom fit-outs, we recommend contacting us early in the procurement process so we can schedule production to meet your site programme.
Ready to specify your changing room or washroom?
Browse our full changing room and washroom range and order online, or speak to our team about a project quote, whether it is a locker pack or a complete personnel hygiene facility fit-out
