Our range of knife sterilisers, consistently provides hot water at sterilisation point of 82⁰C to ensure your knives are always audit compliant. For added peace of mind, the low water cut out prevents the product from boiling dry and the hinged lid provides complete safety at all times.

A flow deflector delivers water in a channelled manner to limit water spray, whilst the overflow ensures the product retains the correct amount of water. Through its clever design, internal channels now direct the water into the wide outlet for quicker drain time after use.

With easy-to-use installation and user instructions, the knife steriliser comes with integral wall fixings for ease of application and to allow for all-round cleaning. The WRAS approved ball valves allows the product to be installed in newbuild applications.

And should you need to change the element, thermostat or low water cut out, access is no longer inside but external of the product, all of which are available as spares.

If you're looking for a non IP rated spare element, these are available. Please contact our customer service team.

<h4>Dimensions - 6 knife</h4>
<ul>
<li>Width: 185mm</li>
<li>Depth: 100mm (148mm including bracket to wall)</li>
<li>Height: 579mm</li>
</ul>

<h4>Dimensions - 12 knife</h4>
<ul>
<li>Width: 265mm</li>
<li>Depth: 148mm including bracket to wall</li>
<li>Height: 579mm</li>
</ul>

<ul>
<li>IP65 rated.</li>
<li>Provides hot water sterilisation point of 82°C.</li>
<li>300mm submerged depth.</li>
<li>Integral low-water safety cut out to extend element life.</li>
<li>Installed overflow to retain ideal amount of water.</li>
<li>WRAS approved 1 ball valve for quicker drain time.</li>
<li>Removable lid.</li>
</ul>