Wash and dry hands in the same spot, no separate hand dryer or paper towel dispenser needed, saving washroom space
Touch-free infra-red operation switches automatically between water and air, reducing cross-contamination risk
Dries hands in 14 seconds directly over the sink, so no water drips on the floor
HEPA filtration captures 99.9% of bacteria-sized particles, with an automatic 60-second flush every 24 hours to reduce water stagnation
HACCP approved, with up to 79% less CO2 and up to 76% cheaper to run than other hand dryers
Choose one, two or three stations, with or without an optional skirt to cover the waste trap
Our stainless steel wash troughs combine hand washing and drying in a single, space-saving unit. Each trough incorporates the touch-free, infra-red Dyson Airblade wash + dry, so there's no need for a separate hand dryer or paper towel dispenser, freeing up room in the washroom for other facilities.
Manufactured in 304L-grade stainless steel with a brushed dull polish finish, the range is available in one, two or three station units, wall mounted with the motor inset in the wall. Where the motor can't be inset in the wall, an optional wall-mounted back box is available. An optional skirt covers the waste trap for a tidier finish, with a removable panel for easy access.
Every wash trough is designed specifically around the Dyson Airblade wash + dry unit, so no water escapes the trough during use. The Airblade switches automatically between water and air via infra-red sensor, with no need to touch a tap or button. A fixed 60-second water flush runs automatically 24 hours after last use, helping reduce water stagnation and bacteria growth. A built-in HEPA filter captures 99.9% of bacteria-sized particles, so hands are dried with clean air, and drying takes just 14 seconds, directly over the sink, so no water drips onto the floor. The system is HACCP approved.
Beyond hygiene, these units are efficient too: up to 79% less CO2 than other hand dryers, 98% cheaper to run than paper towels, and up to 76% cheaper to run than other hand dryers.
To complete your installation, add a thermostatic mixing valve (code WSHS-MVAC) to control water temperature. Need a back box, or a water heater for warmer wash water? See our range of wash trough accessories, or contact our sales team for anything bespoke.
Dimensions
<ul>
<li>1 Station width: 626mm</li>
<li>2 Station width: 1206mm</li>
<li>3 Station width: 1786mm</li>
</ul>
<ul>
<li>Depth: 502mm</li>
<li>Height: 730mm or 1160mm with skirt </li>
</ul>
Specifications
<ul>
<li>304L-grade stainless steel.</li>
<li>Brushed dull polish finish.</li>
<li>Touch free operation.</li>
<li>Operating temperature range 0-40°C</li>
<li>Wall Mounted, Motor inset in wall</li>
<li>1/2 BSP isolated valve required for service</li>
<li>Flow rate: 4 L/min normal fitted aerator alternatively 1.9l/m with low flow aerator supplied with product.</li>
<li>Water pressure 1-8 Bar, Rated Power: 1000W.</li>
<li>Waste 32mm.</li>
<li>Optional ergonomic skirt with removeable panel.</li>
</ul>
Follow the Dyson Installation notes when installing.
Additional information & specsheet
Download specsheet
×
Send a copy to email:
By entering your email, you agree that it will be seen by the store owner and may contact you.
Our stainless steel wash troughs incorporate the touch-free Dyson Airblade Wash+Dry system, combining hand washing and drying in one compact unit. Available in 1–3 stations, they feature HEPA-filtered air and over-sink drying, with an optional skirt available to conceal the waste trap.
Wash and dry hands in the same spot, no separate hand dryer or paper towel dispenser needed, saving washroom space
Touch-free infra-red operation switches automatically between water and air, reducing cross-contamination risk
Dries hands in 14 seconds directly over the sink, so no water drips on the floor
HEPA filtration captures 99.9% of bacteria-sized particles, with an automatic 60-second flush every 24 hours to reduce water stagnation
HACCP approved, with up to 79% less CO2 and up to 76% cheaper to run than other hand dryers
Choose one, two or three stations, with or without an optional skirt to cover the waste trap
Our stainless steel wash troughs combine hand washing and drying in a single, space-saving unit. Each trough incorporates the touch-free, infra-red Dyson Airblade wash + dry, so there's no need for a separate hand dryer or paper towel dispenser, freeing up room in the washroom for other facilities.
Manufactured in 304L-grade stainless steel with a brushed dull polish finish, the range is available in one, two or three station units, wall mounted with the motor inset in the wall. Where the motor can't be inset in the wall, an optional wall-mounted back box is available. An optional skirt covers the waste trap for a tidier finish, with a removable panel for easy access.
Every wash trough is designed specifically around the Dyson Airblade wash + dry unit, so no water escapes the trough during use. The Airblade switches automatically between water and air via infra-red sensor, with no need to touch a tap or button. A fixed 60-second water flush runs automatically 24 hours after last use, helping reduce water stagnation and bacteria growth. A built-in HEPA filter captures 99.9% of bacteria-sized particles, so hands are dried with clean air, and drying takes just 14 seconds, directly over the sink, so no water drips onto the floor. The system is HACCP approved.
Beyond hygiene, these units are efficient too: up to 79% less CO2 than other hand dryers, 98% cheaper to run than paper towels, and up to 76% cheaper to run than other hand dryers.
To complete your installation, add a thermostatic mixing valve (code WSHS-MVAC) to control water temperature. Need a back box, or a water heater for warmer wash water? See our range of wash trough accessories, or contact our sales team for anything bespoke.
Dimensions
<ul>
<li>1 Station width: 626mm</li>
<li>2 Station width: 1206mm</li>
<li>3 Station width: 1786mm</li>
</ul>
<ul>
<li>Depth: 502mm</li>
<li>Height: 730mm or 1160mm with skirt </li>
</ul>
Specifications
<ul>
<li>304L-grade stainless steel.</li>
<li>Brushed dull polish finish.</li>
<li>Touch free operation.</li>
<li>Operating temperature range 0-40°C</li>
<li>Wall Mounted, Motor inset in wall</li>
<li>1/2 BSP isolated valve required for service</li>
<li>Flow rate: 4 L/min normal fitted aerator alternatively 1.9l/m with low flow aerator supplied with product.</li>
<li>Water pressure 1-8 Bar, Rated Power: 1000W.</li>
<li>Waste 32mm.</li>
<li>Optional ergonomic skirt with removeable panel.</li>
</ul>
Follow the Dyson Installation notes when installing.
Additional information & specsheet
Download specsheet
×
Send a copy to email:
By entering your email, you agree that it will be seen by the store owner and may contact you.